GE Washer Troubleshooting: Your Guide to Error Codes and Resetting

If you own a GE washing machine, you might find yourself in a situation where it just won’t cooperate. Whether it’s not spinning or showing error codes, troubleshooting can feel overwhelming. Luckily, GE washers have a built-in diagnostic mode that makes it easier to identify issues without needing to call a repairman. In this guide, we’ll walk you through how to access this mode, interpret error codes, and reset your washer.

Key Takeaways

• Access the diagnostic mode by unplugging and replugging the machine.

• Identify error codes through a simple button sequence.

• Perform parts tests to check for malfunctions.

• Reset the washer to return it to normal operation.

Getting Started with Diagnostics

To begin troubleshooting your GE washing machine, you need to enter the diagnostic mode. Here’s how:

1. Unplug the Machine: Start by unplugging your washer for about 30 seconds. This helps reset the system.

2. Plug It Back In: After waiting, plug the machine back in and wait for 15 to 30 seconds for it to boot up.

3. Enter Diagnostic Mode:Press and hold the Start button.Turn the main dial counterclockwise seven times.Release the Start button. You should hear a chime indicating you’ve entered diagnostic mode.

Understanding Error Codes

Once you’re in diagnostic mode, you can check for error codes. Here’s how:

• Navigate the Codes: Rotate the dial clockwise to move to the next test or counterclockwise to go back.

• Check Fault Codes: The first test available is the fault code mode. When the spin light or the first segment of the display is on, press the Start button to see any fault codes.

• Interpreting Codes: If you see blinking lights, note the pattern. Each pattern corresponds to a specific fault code. If all lights flash simultaneously, it means there are no additional codes.

Common GE Washer Fault Codes

Here’s a quick reference for some common fault codes you might encounter:

Fault Code	Description
1	Lid Lock Issue
2	Drain Pump Failure
3	Agitator Malfunction
4	Water Level Sensor Problem
5	Motor Control Error

Make sure to write down any codes you find, as they will guide you in troubleshooting the specific issue.

Performing Parts Tests

After checking the error codes, you can perform parts tests to see if components are functioning correctly:

1. Return to Diagnostic Mode: If you want to go back to the diagnostic menu, simply turn the dial once.

2. Select Tests: There are 18 tests available. The first five are for control functions, while the rest test various components.

3. Running Tests: To start a test, press the Start button. Rotate the dial to navigate through tests. Each test will help you determine if a part is working or if it’s faulty.

Important Notes on Testing

• Lid Lock Test: This test will automatically lock the lid. If the lid lock is faulty, the washer won’t agitate or spin.

• Ending Tests: To exit a test, just turn the dial. Once you finish all tests, the lights will flash, indicating you’re back at the start.

Resetting Your GE Washer

If you’ve completed your diagnostics and tests, you might want to reset your washer:

• Hold the Start Button: Press and hold the Start button for about 3 to 5 seconds. This will turn off the diagnostic mode and return the washer to normal operation.

Now you’re ready to use your GE washing machine again, hopefully without any issues!

Conclusion

Troubleshooting your GE washing machine doesn’t have to be a hassle. By using the diagnostic mode, you can easily identify error codes and test components to find out what’s wrong. Remember, while this guide helps you understand the codes and tests, you may need to do some additional research to fix the specific issues. If you have any questions or need further assistance, feel free to reach out. Happy washing!